Flashlube Heavy Duty Oil Stabilizer

Flashlube Heavy Duty Oil Stabilizer is a high performance, anti-wear oil formulation containing a powerful blend of additives that provide superior protection against engine wear in old & new engines. This latest formulation puts Flashlube at the forefront of the oil additives market, minimizing oil breakdown & engine wear. It also improves oil lubricity and is compatible with all engine oils.

Flashlube Heavy Duty Oil Stabilizer is a 100% petroleum product formulated to compensate for wear in older engines, gearboxes, differentials and to reduce the wear process in new ones.

Flashlube Heavy Duty Oil Stabilizer also contains a powerful blend of additives that allows motor & gear oils to maintain a higher degree of lubricity. It eliminates high temperature viscosity breakdown, even under the most extreme conditions, allowing the oil to last up to 30% longer. Oil treated with Flashlube Heavy Duty Oil Stabilizer does not run off cylinder walls after shut down, eliminating dry starts, the number one cause of wear in an otherwise well maintained engine.

Ordinary motor oil is formulated with the tolerance of new engines in mind. Once an engine becomes worn the wearing process advances at a rapid rate because motor oil alone cannot adequately lubricate the moving parts. This is particularly true in the use of synthetics.

Application:
Flashlube Heavy Duty Oil Stabilizer is formulated for both new and old engines. While a small amount (up to 25%) can maintain a new engine, larger amounts (up to 50%) can be added to a worn engine to properly seal and cushion the moving parts, to slow oil consumption and prevent further wear. Recommended for use in all new & used cars, trucks, motor bikes, boats, agricultural and industrial equipment, in engines, gearboxes & differentials (not recommended for use in automatic transmissions).

Directions:
Add Flashlube Heavy Duty Oil Stabilizer to engine oil. New Petrol (Gasoline) & Diesel engines: Add 20%-25% (1 Qt. to 4 Qts. of oil) Worn Petrol & Diesel engines: Add 25%-30% (1 Qt. to 3 Qts. of oil) Add 1 Qt. of Oil Stabilizer to 5 Qts. of engine oil. Add Flashlube Heavy Duty Oil Stabilizer directly to the engine, with engine oil, when engine is at normal operating temperature, or when changing your oil. Start & run engine for 10 minutes to allow Flashlube Oil Stabilizer to blend completely with engine oil. Use Flashlube Heavy Duty Oil Stabilizer with every oil & filter change.

Benefits:

• Reduces oil leaks, noise & blow by
• Reduces oil consumption
• Increases oil pressure & engine compression
• Reduces smoke & exhaust emissions
• Lowers engine temperature
• Improves fuel economy
• Extends oil life (up to 30%)
• Reduces metal to metal contact that causes serious wear
• Stops dry starts & reduces friction
• Extends engine life
• Provides superior engine protection

Features:

• Blends with all automotive lubricants, even synthetics and mineral oil
• Made in Austrailia
• Available in various pack sizes, from 500 ml (16.9 Oz.) to 20 Litre (5.25 Gal.)