Edge Products "NEW" Evolution Programmer - GM Gas Engines |
Continue shopping |
Edge Products "NEW" Evolution Programmer - GM
Gas Engines
EDGE PRODUCT NEXT GENERATION EVOLUTION PROGRAMMER FOR GM GAS ENGINE VEHICLES
With the introduction of the "NEW" Evolution, Edge Products has entered a new realm of the aftermarket gas-engine industry. Contained in this tiny module is the capability not only to improve driveability and performance, but also the ability to display and clear trouble codes, remove the speed and rev limiters and adjust power levels.
The Evolution connects directly into the OBDII port underneath the dash. Once connected the stock software is downloaded and the new Evolution software is uploaded onto the trucks ECM. All modifications are done during this process and can be just as easily be switched back to stock at any time. The Evolution comes USB ready so it can be updated over the internet for all the latest tunes and features.
The Evolution was created with a small lightweight design that allows personalized control with the touch of a button. With a backlit LCD screen, seeing and reading codes has been made simple. The unit not only displays codes, but also displays a description of what these codes mean, which eliminates copying the code down and then finding a manual to look them up.
The new Evolution for the GM Gas Engines has shown gains of 40 HP and 40 ft/lbs of Torque and you can choose from 4 different power levels!! It can display up to 4 of 24 different parameters at a time in an easy-to-read format. The Evolution monitors vital engine data such as: engine load, engine oil temp, coolant temp and transmission fluid temp, just to name a few. Plus, the Evolution screen can be adjusted to any color you choose and ships with it's own mounting pod!!
FEATURES:
- Gains of 40 HP and 40 ft/lbs of Torque!!
- Choose from 4 different power levels
- Installs in 5 mins, with no tools necessary
- Displays and clears diagnostic codes
- Adjusts speed and rev limiter
- Adjusts shift points and tranny fluid pressure
- WOT fuel and octane ratings
- Idle adjustment for power pulleys
- Adjust tire size and gear ratio
Transmission Only, Fuel Economy, Towing, Extreme
PIDS (Parameter ID's Displayed):
RPM's, MPH, Engine Coolant Temp, Barometric Pressure, Air Intake Temp, Engine Oil Temp & Pressure, Tranny Fluid Temp, Battery Voltage, Spark, MAP, MAF, Ambient Air Temp, Desired Idle, APP, AFC, Fuel, Loop Status, Power Enrichment, Current Gear, AFP, DCYL, DCD & DCA.
PERFORMANCE TESTS:
0-60 times with drag strip christmas tree lighting and reaction times, 1/4 mile times, 1/8 mile times & 60 foot perf tests.
ALERTS:
Sounds audible alert when user-set values are reached and automatically records the highest value of key parameters for Engine Coolant Temp, Speed & Trans Temp (if truck has sensor)
DATASTREAMING:
Choose up to 5 of 14 different PIDS at a time to graph up to 60 seconds worth of streaming data onto your pc. You can even view estimated flywheel HP and 1/4 mile times!!
*See shipping policy for additional info.
©AutoCustomizers.com LLC. 2003-2008, all rights reserved.