Home > Performance > Drivetrain > Differential Covers >	Product Code: E7MHT220.3
Mag-Hytec Performance Differential Covers Mag-Hytec	Continue ShoppingView Other Differential CoversReady To Buy?

Instant Savings! - Price too low to display!

Add the product to your cart to see the lowest price! There is no obligation to buy.  The product can be removed from your cart at any time.

MAG-HYTEC PERFORMANCE DIFFERENTIAL COVERS

Mag-Hytec heavy-duty Differential Covers provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function - cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. As the metallic components in transmissions and axles wear, they generate very fine particle debris that becomes suspended in the lubricating oil. All Mag-Hytec covers come with a suspended magnet that acts as a filter to contain these particles, keeping the fluid cleaner and extending component life. Periodic checking and cleaning of the magnet is recommended for maximum fluid service life. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303-type stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Every Mag-Hytec differential cover comes fully assembled with everything you need to install it yourself. Depend on Mag-Hytec when you're pulling a heavy load!!

AND DON'T FORGET YOUR Royal Purple Max-Gear Oil!!!

• Suspended magnet to extend component life
• O-rings require no gaskets or sealant
• Routine lube maintenance without removing the differential cover
• 1/8 NPT temperature sender port
• 303 stainless steel hardware
• Lube level reference plug
• Finned aircraft aluminum housing
• Requires allen key wrenches (included) for installation and service

All Mag-Hytec products are covered by a lifetime limited warranty to the original owner against defects in parts and workmanship. O-rings are covered for five years.

A word of caution to the installer I vehicle owner:
The Mag-Hytec cover is designed to fit the factory Dana axles as supplied as original equipment. However, in some applications, or because of the use of certain factory options and/or after market equipment, there may be clearance problems between your Mag-Hytec cover and other vehicle systems (specifically some rear sway bars). It may be necessary to install spacers or shims to lower the sway bar. It is the responsibility of the vehicle owner/cover installer to ensure that there is no contact with Mag-Hytec cover. Contact with any vehicle component or the modifying of the Mag-Hytec pan voids the warranty.

PLEASE NOTE THAT SOME VEHICLES HAVE MULTIPLE LISTINGS!!! This is due to the fact that at certain times, automotive manufacturers will vary the type/style of differential & transmissions they install in vehicles or use different types/styles on the same model year vehicle, due to circumstances such as optional packages, availability of equipment etc... Also, if you purchased a used vehicle, a previous owner may have altered the drivetrain and changed the transmission and/or differential. THESE LISTINGS ARE MEANT AS A GUIDELINE ONLY!!! PLEASE MAKE SURE TO CHECK THE SHAPE, SIZE AND BOLT PATTERN ON YOUR COVER AGAINST THE IMAGES ON THIS PAGE BEFORE ORDERING, IN ORDER TO ENSURE YOU ARE ORDERING THE CORRECT COVER FOR YOUR VEHICLE!!!

	GM 10-8.5
	GM 14-9.5
	GM 14-10.5-A
	GM AA 14-11.5
	Dodge Dana #44
	Dodge #12-9.25
	Dodge Dana #70
	Dodge Dana #80
	Dodge Dana #60-DF Dodge Front
	Dodge #AA 14-11.5 Dodge Rear
	Dodge ##AA 14-10.5 Dodge Rear
	Dodge ##AA 14-9.25 Dodge Front
	Ford 10-8.8
	Ford 12-9.75
	Ford 12-10.25 & .5
	Ford F350 Dana #FFD-60 Front
	Ford Dana #60-FF Ford Front
	Ford Dana #80
	Nissan MT-#44

Royal Purple Max-Gear Oil Price from : $11.95

©AutoCustomizers.com LLC. 2003-2008, All rights reserved.