Springs

Precision engineered coil springs are designed to work with or without Ground Force spindles to provide 1-3" of additional drop. Coils are hot wound for precise fit, quenched, shot peened and powder or PVC coated for sleek looks and corrosion resistance.

From our value line-up of Hellwig Helper Springs; these units pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehic...

From our value line-up of Hellwig Helper Springs; these units pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehic...

This Hellwig Helper Spring set the standard for all other aftermarket Helper Springs. Featuring Progressive Spring Rate design, the Load Pro Series Helper Spring is the workhorse of the Hellwig Spring offerings. With the Progressive Spring Rate design the vehicle must be loaded and its spring com...

The LP-15 Spring line fits the Mid-size and Small pick-up groups. Manufactured with heat treated ASTM 5150 alloy spring steel in our California based facility, these units increase your vehicle’s level load carrying capacity up to the manufacturer’s Gross Vehicle Weight Rating. Featuring heavy duty ...

Featuring its patented bolt on design, "Silent Ride" polyurethane stability blocks, plated and powder coated components and easy to follow installation instructions make this the Helper Spring of choice for do-it-yourself and professionals alike. Manufactured with heat treated ASTM 5150 alloy spr...

For use with Hellwig Helper Springs

Weld-on spring pads fit 3" housing, hardware included

Mr. Gasket Rear Spring Clamp Set

Performance Accessories Spring PerchesNewly available from Performance Accessories are weld-on leaf Spring Perches. Sold in sets of two, our Spring Perches are intended to be welded to the axle tube for custom leaf spring mounting. Made from high-quality domestic steel, Performance Accessories Sp...

SUPERLIFT BEND CLIPSMost vehicles are equipped with fairly thick, riveted-on straps that hold the leafs together; these generally can be reused. We include the thinner, "use one time only" bend clips with the appropriate leaf applications. Extra bend clips are needed it the factory straps cannot be ...

SUPERLIFT ADD-A-LEAF SPRING KITS Superlift Add-A-Leaf Kits are the perfect solution for when your leaf springs get older and start to sag, or for vehicles used for snow plowing or hauling heavy loads. The Superlift Add-A-Leaf kit will correct this problem AND save you money, as compared to replacin...

SUPERLIFT DEGREE SHIMS Made of Tensalloy alumininum. These are the same type shims that are used with our leaf springs. Shims are designed to be attached to springs and are intended for driveshaft alignment. The shim tie-bolt holes are 5/16", so reaming may be necessary. We do not recommend using m...

Superlift Rear Lift SpringsThese lift coil springs from Superlift are manufactured from Spec 5160 spring steel. They are designed to give you the ride height increase you want, with minimal effect on ride quality, and are preset solid to minimize settling.

Superlift U-Bolt KitIncludes washers and nuts.

Superlift U-Bolt KitsU-bolt kits contain new Nylon inserted lock nuts and extra thick flat washers. Generally, U-bolt length is adequate for a 5 to 6 leaf thick spring pack.

Superlift U-BoltsOur U-bolts are manufactured from low alloy, high strength steel. U-bolts up to 13" long have a typical yield strength of 90,000 PSI and a tensile strength of 120,000 PSI. The 14" and longer U-bolts typically have a 115,000 PSI yield and 133,000 PSI tensile strength. Thread type is ...

"Add-A-Leaf" to add strength and support to your rear springs. WARNING: Trail Master does not recommend combining body lifts with suspension lifts. See product safety statements. WARNING: Do not use add-a-leafs with composite type leaf springs. WARNING: Leaf alignment clips are recommended for ...